Installing NERO-PLUG​
The NERO-PLUG is an easy to install smart plug, that lets you wirelessly control whatever is plugged into it. Perfect for quick installations that require basic on/off control such as outdoor lighting or lamps. It offers energy monitoring and side mount USB charging.
​
Familiarize yourself with your NERO-PLUG
(Note: this figure is a sample of USA version. For other versions, the product appearance would be different).
Quick start
Getting your NERO-PLUG up and running is as simple as plugging it into a wall socket and adding it to your NEXUS-NERO.
1. Follow the wizard on the NEXUS-NERO Communications Gateway to sync the NERO-REED.
2. Decide on where you want your NERO-PLUG to be placed and plug it into a wall outlet.
3. Press the Action Button on your NERO-PLUG
4. If NERO-PLUG has been successfully added to your NEXUS-NERO, its RGB LED will be solid. If the adding was unsuccessful, the red LED will be on for 2 seconds and then remain colorful gradient status, repeat the instructions from step 3.
With your NERO-PLUG now working as a part of your smart home, you’ll be able to configure it from your NERO OS. Please refer to your software’s user guide for precise instructions on configuring NERO-PLUG to your needs.
The color of RGB LED will change according to the output load power level when it is in Energy mode:
Removing your NERO-PLUG from your NEXUS-NERO
Your NERO-PLUG can be removed from your network at any time. To do these please follow the steps below:
-
Follow the NERO OS wizard for the NERO-PLUG and select RETRY
-
Press the Action Button on your NERO-PLUG.
-
If your NERO-PLUG has been successfully removed, its RGB LED will remain colorful gradient status. If the removal was unsuccessful, the RGB LED will still be solid (Energy mode state when the output is on or Night light mode state when the output load is off), repeat the instructions from step 3.
Advanced functions.
Changing LED mode.
There are interchangeable modes for the RGB LED on the NERO-PLUG. There are 3 different modes: Energy, Momentary indicate, and Night Light.
Energy mode will allow the LED to follow the state of NERO-PLUG, when the switch is on, the LED will be on, and while the switch is off, the current color LED will be off and then remain the purple color of 10% brightness.
Momentary indicate mode will momentarily turn the LED on for 5 seconds then turn off after every state change in the switch.
Night light mode will allow the LED to be turned on and off during your selected time of day you have configured for it.
Reset your NERO-PLUG.
If, at some stage, your NEXUS-NERO is missing or inoperable, you may wish to reset all of your NERO-PLUG’s settings to their factory defaults. To do this, press and hold the Action Button for 20 seconds and then release it. Your NERO-PLUG will now be reset to its original settings, and the green LED will be solid for 2 seconds and then remain in gradient status as a confirmation.
Technical specifications.
Max standby power: 0.5W.
USB output: DC 5V±0.3V, 1000mA.
Operating temperature: 0 C to 40 C
Relative humidity: 8% to 80%.
AC Input: 230V 50Hz, Max: 10A